How to Use Chalk Paint as a Primer

We are searching data for your request:

Forums and discussions:
Manuals and reference books:
Data from registers:
Wait the end of the search in all databases.
Upon completion, a link will appear to access the found materials.

Although there are many, many online resources that instruct how to make chalk paint, the simplest way is simply adding a slurry of pure calcium carbonate to latex paint. The prepared chalk paint can be applied directly to bare or sanded wood. When fully dry, this paint is easily sanded with fine sandpaper to be topcoated. For interior wood and related porous surfaces, chalk paint is an effective primer.

Many modern paints are sold as primer/paint in one coating for frugal shoppers who want to minimize time on home DIY projects. The problem is that these all-for-one paints usually require multiple coats and adhesion might be compromised. Instead, a single can of paint be used for priming and painting separately. By adding chalk, a superior primer is created, and the remaining paint can be tinted or mixed with another color of paint for the topcoat.

Chalk Paint Recipe

The following is provided just as a starting point. You may need to adjust the formula to suit your needs. This recipe is based on flat or matte latex paint. If you have semigloss or gloss, then your chalk amounts will be higher.

  • 1/2 quart of flat or matte latex paint
  • 3 tablespoons of calcium carbonate
  • 4 tablespoons of warm tap water

I normally recommend distilled water for crafts and painting, but when mixing chalk with water, we are adding what is already there. It is important to make a slurry of the chalk before adding to the paint to limit any lumps of chalk of forming in the paint.

Prepare Chalk Slurry

Put the chalk into a separate container, and add warm tap water until a smooth slurry is obtained through mixing. It should be like a heavy whipping cream consistency. This is basically a dispersion of sorts, and you add this to your latex paint. You’ll notice that even though you have added water to the, mix the new paint is actually thicker. DO NOT THIN! The viscosity helps keep everything suspended. Periodically stirring while applying coats is required.

Calcium Carbonate Slurry

Apply First Coat

It is recommended that the first coat goes on thin for fast drying. Complete coverage is not needed and is not recommended. This first coat establishes adhesion and provides a tooth or key for any following coats. The paint itself, having a significant amount of minerals, will set up and dry VERY quickly. DO NOT LEAVE PAINT ON BRUSH! Rinse brush thoroughly after each coat. Otherwise, when you return in 30 minutes to apply a second coat, you’ll have a stiff brush to deal with. The bright side is that you’ll be able to apply three coats in a couple hours total.

Variations in Chalk Content in Recipe

Variations of chalk content in chalk paint recipe.

Type of PaintAmount of Chalk Per Qt. of PaintWater Added Per Qt. of Paint

Flat latex paint

3 tablespoons

4 tablespoons

Semi gloss latex paint

5 tablespoons

6 tablespoons

Gloss latex paint

6 tablespoons

8 tablespoons

Additional Coats of Chalk Paint

After letting the first thin coat of chalk paint dry, it is now time to apply a second coat. Just like the oil painting adage of “fat over lean," the second coat can be a bit more liberal. Not only will this coat come real close to 100% coverage, but small scratches and pinholes can be at least partially filled. This is because the chalk is acting like a putty. This chalk paint is a high-solids sandable primer after all.

If the topcoat is going to be a dark color, you can stop here and let the chalk paint fully cure for 24 hours before topcoat. On the other hand, if you really want to fill scratches and pinholes better or want to try to hide a dark color under a lighter one, a third coat will be necessary .

Prepping for Top Coat

After 24 hours have passed and all coats of chalk paint are thoroughly dry, it can be prepped for the topcoat. The chalk in the chalk paint allows it to be easily smoothed with fine sandpaper. Once sanded to a perfectly smooth finish, the only thing needed is a thorough wiping down with a damp towel to clear paint dust before painting.

Jason (author) from Indianapolis, IN. USA on November 17, 2019:

Your welcome! There will be updates! The dresser in the pictures is still a work in progress.

Jill Spencer from United States on November 17, 2019:

Thanks for the information. I am bookmarking this.

Watch the video: Annie Sloan Chalk Paint Dresser Makeover - Project Vlog

Previous Article

How to Enjoy the Aroma of Scented Candles Without Burning Them

Next Article

Apache Plume Shrubs Are Showy, Native Western Favorites